To get the most from this material, you need to be familiar with basic Live Loop cable and Live Loop stitch techniques. For an introduction to Live Loop techniques, see this video, or purchase the book Live Loop Cables in Crochet here.
Video Demonstration
~ ~ ~
Here's a more in-depth look at some of the things addressed in the video.
Important Fundamentals of Live Loop (LL) Cables
Every LL cable loop has a right side (RS) and a wrong side (WS). The RS of an untwisted cable loop faces the same direction as the RS of the fabric, when the cable loop is held parallel to the fabric face. To prevent twisted cable loops, always insert your hook from RS to WS into an untwisted cable loop, whether you're working a RS or a WS row.
But what if your loops don't sit parallel to the fabric face? Unsecured cable loops can twist, and loops placed on a holder actually sit sideways. How do you tell which is the RS?
Practice is key. The more LL cables you work, the better you'll get at recognizing the RS of a loop. Understanding how yarning over vs yarning under affects loop orientation can also help.
To Hold or Not to Hold - and When
After pulling up your cable loops, you can put them on a holder, or leave them loose. (Another way to secure loops is detailed in the book, but not addressed in the video or this post.)
If you do use a holder, you can:
- Insert it while the loops are still on the hook. This will preserve the loops' initial orientation.
- Insert it after you remove the hook. This gives you the option to change their orientation.
This post shows the results of inserting a holder while the loops are still on the hook.
Yarning Over/Under and Loop Orientation
You can yarn over or yarn under when pulling up new cable loops. It makes no difference to the finished cable, as long as you insert your hook into each cable loop from RS to WS on the following row.
However, yarning over/under does affect the new loop's initial orientation.
RS Row Cable Loop Orientation
Here's what happens when you yarn over or yarn under while working a RS row LL cable, and insert a holder while the loops are still on the hook:
If you're working in back-and-forth rows, this means:
- Loops pulled up by yarning over on the RS row will face away from your hook hand when you work the following (WS) row.
- Loops pulled up by yarning under on the RS row will face towards your hook hand when you work the following (WS) row.
WS Row (Inverse) Cable Loop Orientation
Note: I call LL cables worked on a WS row inverse cables, because they are worked with the yarn held in front and the hook in back.
Here's what happens when you yarn over or yarn under (as illustrated below) on an inverse cable, and insert a holder while the loops are still on the hook:
If you're working in back-and-forth rows, this means:
- Whether you yarn over or yarn under, if you do it exactly as shown above, loops pulled up will face towards your hook hand when you work the following (RS) row.
This was a bit of a mind-bender for me. I had to test this over and over before I grasped the results. Just call me spatially-challenged! :)
Hook Insertion Tip for Inverse Cables
When working inverse cables, if you find it awkward to insert your hook, try catching the near leg (the leg that connects to the stitches nearest your hook hand) with the lip of the hook, then sliding the hook tip through the loop.
In the video, you can see me do this starting at the 2:03 mark.
Summary
For successful LL cables worked in back-and-forth rows: always insert your hook from RS to WS into an untwisted cable loop; if you place your loops on a holder, note which way they're facing, and make sure they all face the same way. This will help you identify the loops' RS when you work the following row.
When working inverse (WS row) cables, move your yarn to the front before working the cable, then to the back before working the LL stitch after the cable. (Remember that front and back refer to whatever side you're working on right now.) As you complete the LL stitch, keep the cable loops to the back (on the fabric's RS).
You can yarn over or yarn under when pulling up cable loops, as long as you keep it consistent within each cable, and insert your hook properly on the following row. I like to yarn over on RS rows, and yarn under on WS rows; you should do whatever works best for you.
~ ~ ~
Thanks for viewing and reading this post. If you have any questions, feel free to ask in the comment section below.
Happy crochet, and happy cabling!
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
